Asbestos decontamination: what it covers and who does it
Decontamination is the part of an asbestos job that stops fibre following people home. It is not a quick tidy-up and it is not a DIY task.
Asbestos decontamination is the cleaning of people, equipment and the work area so that no fibre leaves the site. On a licensed job it is planned, done in a set order and checked afterwards. It is not the same as a general clean-up. And it is not something to improvise at home.
Three things get decontaminated
The first is the workers. On friable (Class A) jobs they leave the work area through a decontamination unit, a set of connected compartments with a dirty end, a shower and a clean end. The one-way order is the point.
The second is the equipment. Tools, sheeting and anything else that met the material is cleaned before it leaves or is bagged as asbestos waste.
The third is the area itself. Surfaces, ledges, roof cavities and the ground outside are cleaned by a licensed removalist using wet methods and industrial HEPA-filtered equipment. A household vacuum or a broom spreads fibre instead of removing it.
Bonded jobs and friable jobs are not the same
The amount of decontamination should match the risk. A bonded sheet coming off an outside wall needs less than a crumbling friable lagging in a roof space. Your state or territory work health and safety regulator sets what applies to each job.
If you are unsure which kind of material you have, do not guess. A sample analysed at a NATA-accredited laboratory is how the material is identified. Our guide to bonded and friable asbestos explains why the difference matters.
Why you cannot do it yourself
Friable asbestos work is Class A licensed work everywhere in Australia. Decontamination is part of that work. This site does not publish methods for it, because the steps depend on the licence, the plan and the equipment. And getting one wrong puts fibre in your house.
For bonded material, what a homeowner may do on their own property varies by state and territory. Read what a homeowner may legally remove and check with your regulator first.
What the end of the job should look like
Decontamination is not finished when the shower is packed up. The area is inspected, and on friable work an independent licensed assessor takes air samples and issues a clearance certificate. See air monitoring and clearance and containment and decontamination: what you should see.
Ask for the certificate and keep it. If a removalist says the job is clean but offers nothing in writing, treat that as a warning, not a courtesy.
Frequently asked questions
What is asbestos decontamination?
It is the cleaning of workers, equipment and the work area so that no asbestos fibre leaves the site. On friable jobs it includes a decontamination unit for the workers and HEPA-filtered cleaning of the area.
Can I decontaminate an area myself after asbestos has been disturbed?
Do not try. Household vacuums and brooms spread fibre. Keep people out and call a licensed removalist or an assessor. Friable work is Class A licensed work everywhere in Australia.
Is a decontamination unit always needed?
It is standard on friable, Class A work. For bonded work the arrangements are proportionate to the job, and the requirements are set by the regulator in each state and territory.
Who confirms the area is safe afterwards?
On friable work an independent licensed asbestos assessor issues the clearance certificate after inspection and air monitoring. The removalist cannot sign off their own job.
Sources
What this page explains is based on these official sources. If you check one and it does not match what you read here, send it to us and the article gets corrected.
- SafeWork NSW. Asbestos: clearance inspections and certificates