Asbestos gaskets and seals: where they hide and what to do
Gaskets sit out of sight in old appliances and pipework. Do not scrape or grind them off.
Gaskets, seals and rope packing in older appliances and pipework may contain asbestos. They do not release fibre just by sitting there. The risk starts when you scrape, grind or wire-brush them off.
Where gaskets and seals turn up
Think of anything that gets hot or carries steam. Old boilers, hot water units, wood and gas stoves, flue joints, pipe flanges, pumps and furnace doors all used sealing material. Door seals on older ovens and heaters are another place.
In a garage, older engines and exhaust joints may have them. A shed workbench with a box of spare gasket sheet is worth a second look as well.
What they look like
Grey, off-white or brown compressed sheet, often between two metal faces. Rope and tape seals look like braided cord. Some are thin and papery, others thick and fibrous.
You cannot tell from the look of it. A modern gasket can look the same as an old one. The Asbestos Product Guide, listed under sources below, helps you work out whether a product of that type and age used asbestos.
What not to do
Do not scrape off old gasket material, sand the faces, grind a flange or clean a joint with a wire brush. Do not blow it clear with an air line. Those jobs break the material and put dust in the air.
If you only need to undo a bolted joint, stop. Opening it can already tear the gasket.
If you need to work on the appliance
Say what you suspect before anyone starts. A plumber, gas fitter or appliance technician should know about it. Then have the material checked: a sample analysed at a NATA-accredited laboratory confirms whether it is compatible with containing asbestos. A licensed assessor can advise on taking it, and our page on taking an asbestos sample explains why you should not do it yourself.
If it is confirmed, removal and disposal are licensed work. See Class A and Class B licences, and ask your state WHS regulator what applies to you.
Is it worth replacing the appliance?
Not by default. A sealed, working appliance that nobody opens can stay. Replace it when you have a real reason, and then use a licensed professional for the old parts.
Frequently asked questions
Do old gaskets contain asbestos?
Some do. Sealing materials for heat and steam often used it. You cannot tell by looking. A sample analysed at a NATA-accredited laboratory confirms it.
Can I scrape an old gasket off myself?
No. Scraping, grinding or wire-brushing can put dust in the air. Have the material checked first.
Is a sealed boiler or stove a danger?
An intact seal that nobody disturbs is not releasing fibre just by being there. The risk begins when someone works on it.
Who do I ask about an old appliance?
Tell the tradesperson before work starts, and ask your state WHS regulator what applies. A licensed assessor can arrange sampling.
Sources
What this page explains is based on these official sources. If you check one and it does not match what you read here, send it to us and the article gets corrected.
- Asbestos Safety and Eradication Agency. Asbestos Product Guide: what products contained asbestos and where they were used
- NSW Government. Asbestos in NSW: the NSW Government asbestos portal
- Western Australian Department of Health. Guidance note: Identification of asbestos containing material