Home › In the home › Painting asbestos walls, eaves and fences: what is safe

Painting asbestos walls, eaves and fences: what is safe

Paint can be fine on sound sheeting. The preparation is where people get into trouble.

You can often paint over sound, undamaged sheeting that may contain asbestos. But you must not sand, scrape, scrub or pressure wash it first. The paint is rarely the problem. The preparation is.

Why painting is a different question from sanding

Fibre cement sheet that is intact and well bonded does not release fibre just by sitting there. A coat of paint applied gently can bind the surface and slow weathering. Roughing up the surface to help the paint grip does the opposite. It breaks the surface and puts fibre in the air.

Old flaking paint tempts people to scrape and sand. Do not. If you have already done it, see what to do after sanding asbestos.

Walls, eaves and fences are not the same job

Interior walls and ceilings are the least forgiving, because dust stays in rooms you live in. Eaves and soffits are exposed to weather, so the surface is often chalky or cracked. Fences are usually weathered, brittle and easy to snap.

Chalky, crumbling or cracked sheeting is past a simple coat of paint. Treat it as damaged and ask for advice before you touch it. Our page on asbestos in eaves and soffits covers that case, and the roof has its own page: painting and cleaning an asbestos roof.

Confirm what you have first

Age and appearance do not tell you what a sheet is made of. Many painted fibro-looking sheets are asbestos free. A sample analysed at a NATA-accredited laboratory confirms whether the material is compatible with containing asbestos. If you want to know before you spend money on paint, read about taking an asbestos sample.

What to ask before anyone paints

  1. Is the surface sound? No cracks, no powdery face, no broken edges.
  2. How will it be prepared? If the answer includes sanding, scraping, wire brushing or a pressure washer, say no.
  3. Who does the work? A painter should know the sheeting may contain asbestos before they start, not after.
  4. What do the rules say here? Requirements differ by state, so ask your WHS regulator.

Be honest about the limit of paint. On damaged sheeting it is cosmetic, and it can make later removal more awkward. When the sheet is failing, the real conversation is about what a homeowner may legally remove, and when a licensed removalist is needed.

Frequently asked questions

Can you paint over asbestos?

Often yes, if the sheeting is sound and the paint goes on without sanding, scraping or pressure washing. Check with your state WHS regulator first.

Can I sand flaking paint off asbestos sheeting?

No. Sanding, scraping and wire brushing break the surface and release fibre. Ask a licensed professional.

Is asbestos paint a thing?

People search for it, but paint does not make a sheet safe or unsafe. What matters is the condition of the sheeting underneath and how it is prepared.

Should I paint damaged or crumbling sheets?

No. Paint on damaged sheeting is cosmetic. Get advice from an assessor and your regulator before doing anything.

Sources

What this page explains is based on these official sources. If you check one and it does not match what you read here, send it to us and the article gets corrected.

Keep reading