Home › Identifying › Fibro houses in Australia: what fibro is and what to do about it

Fibro houses in Australia: what fibro is and what to do about it

Many fibro houses contain asbestos cement, but the word fibro does not prove it. Here is how to judge your house and what to do next.

A fibro house is one clad or lined with fibre cement sheet. And in houses built before the mid 1980s that sheet very likely contains asbestos. It was a cheap, quick way to build, so it went up all over Australia.

The word fibro is slang, though. It describes the look of the sheet, not what is in it. So the real question is how old your sheet is.

What fibro actually is

Fibro is short for fibrous cement. Manufacturers pressed cement and fibre into flat sheets, then nailed them to timber frames as external walls, internal linings, eaves and wet area walls. Many of those sheets used asbestos as the fibre, because it was strong, cheap and fireproof.

The Asbestos Safety and Eradication Agency keeps a product guide showing the kinds of building products that contained asbestos and where they were used. Flat fibre cement sheet is one of the most common entries.

Why the age of the house is your first clue

Asbestos was not banned outright in Australia until 31 December 2003. Manufacturers had phased it out of most building sheet during the 1980s, but stock kept being used afterwards.

  • Built before about 1987: assume the fibro contains asbestos.
  • Built between about 1987 and 2003: possible. This is the grey zone where a laboratory result is worth having.
  • Built after 2003: asbestos is not expected in new materials, but a renovation of an older house may have reused old sheet.

Where to look in a fibro house

Fibro turns up in more places than the outer walls. Check these first.

  • Eaves and soffits under the roof edge.
  • Bathroom, laundry and toilet walls.
  • Internal wall and ceiling linings.
  • Fences, sheds and garages built in the same era.
  • Roof sheets and flat sheet behind a later cladding.

Looking is fine. Cutting, drilling or scraping to see inside is not.

Leaving it alone is often the right call

Sound, painted fibro that nobody is cutting, drilling or sanding is not an emergency. Asbestos cement holds its fibres bound in the cement. The risk comes when you break the sheet.

So do nothing yet if it is intact. Keep it painted, keep it dry and keep tools away from it.

Before you renovate a fibro house

This is where people get caught. A new window, a power point or a kitchen move all mean cutting into the wall.

Get a result before you book trades. Presume the sheet contains asbestos, or have a sample analysed. Only a laboratory confirms what a sheet is made of, and a NATA-accredited laboratory is the one whose result you can rely on. Taking the sample disturbs the material, so check with the WHS regulator in your state or territory about who may take it and what precautions apply.

When the fibro is damaged

If sheets are cracked, broken, water damaged or crumbling, stop. Keep people and pets away. Do not sweep, hose or vacuum the debris. Ask a licensed professional what comes next, because the rules on who may handle damaged material depend on your state or territory.

Our page on how testing works explains what a result can and cannot tell you.

The short version

Treat fibro in a pre-1987 house as asbestos until a laboratory says otherwise. Leave it sealed and untouched. Get a result before any work that would cut, drill or sand it.

Frequently asked questions

Do all fibro houses contain asbestos?

No, but many do. Fibro sheet made before the mid 1980s very likely contains asbestos cement, while later sheet may not. Only laboratory analysis of a sample confirms what your sheet is made of.

Is it safe to live in a fibro house?

Sound, intact and painted fibro that is not being cut, drilled or sanded is generally managed by leaving it alone. Check with your state or territory WHS regulator for the rules that apply to you.

Can I renovate a fibro house myself?

Not until the sheet has been tested or you presume it contains asbestos and follow your state or territory rules. Cutting, drilling and sanding release fibres from asbestos cement.

How do I find out if my fibro contains asbestos?

A sample analysed by a NATA-accredited laboratory. Check with your state or territory WHS regulator about who may take the sample before anyone disturbs the sheet.

Sources

What this page explains is based on these official sources. If you check one and it does not match what you read here, send it to us and the article gets corrected.

Keep reading