Asbestos panels: where they were used and how to deal with them
Flat panels in a pre-2004 home may be asbestos cement. You cannot tell by looking, so here is where to check and what to do.
Flat wall, ceiling and eave panels in a house built before 2004 may contain asbestos. And you cannot tell by looking at them. Many were asbestos cement sheet, sold in large flat panels and fixed over timber frames.
The useful question is not whether a panel looks old. It is whether anyone is about to cut, drill or remove it.
Where asbestos panels were used
Flat sheet was a standard lining for decades. The Asbestos Safety and Eradication Agency product guide lists many of the places it went.
- Internal walls and ceilings, especially in wet areas.
- Eaves and soffits.
- External cladding, often painted over.
- Behind tiles in bathrooms and laundries.
- Under verandahs, in carports and on garage walls.
Panels also hide. A later lining or a coat of paint can sit over the original sheet.
Why looks will not settle it
Asbestos cement panels look like ordinary flat fibre cement board. Colour, chalkiness and weathering are the same on old and new sheet. A stamp or a printed mark on the back may point you to a product, but only to look it up.
A photograph cannot settle it either. You can compare what you see with the images in the product guide to learn what old products looked like. Do not use that to decide what is on your wall.
What the age of the building tells you
Asbestos was not banned outright in Australia until 31 December 2003. Most building panels stopped being made with it in the 1980s, but sales and use ran on for years.
- Built or renovated before the late 1980s: presume asbestos.
- Built in the late 1980s to 2003: a grey zone where a result is worth having.
- Built after 2003: not expected, unless old panels were reused.
Leave it alone if it is sound
Intact, painted panels that nobody is touching are not a job for today. Keep them dry, keep them painted and keep tools away.
The risk begins when a panel is broken, drilled, sanded or cut. So the moment to act is before a renovation, not after the first hole.
Before you cut or remove a panel
Presume it contains asbestos, or have a sample analysed. Only laboratory analysis confirms what a panel is made of, and a NATA-accredited laboratory is the one whose result you can rely on. Taking the sample disturbs the material, so check with the WHS regulator in your state or territory about who may take it and what precautions apply.
If panels are cracked, water damaged or crumbling, stop and keep people away. Do not sweep or hose the debris. Ask a licensed professional what comes next.
Our page on how testing works covers what a result can and cannot tell you.
The short version
Treat panels in an older house as asbestos until a result says otherwise. Leave sound ones alone. Get a result before any work that would disturb them.
Frequently asked questions
How can I tell if a panel is asbestos?
You cannot tell by looking. Only laboratory analysis of a sample confirms what a panel is made of, and a NATA-accredited laboratory is the one whose result you can rely on.
Are all old flat panels asbestos?
No. Many panels made before the late 1980s were asbestos cement, but not all, and later panels may not be. The age of the building is a clue, not a result.
Can I remove an asbestos panel myself?
Rules on removal depend on your state or territory and on the amount and condition of the material. Check with your WHS regulator before touching it, and never cut, drill or sand a panel that may contain asbestos.
What should I do with a cracked panel?
Stop work, keep people and pets away and do not sweep or hose the debris. Ask a licensed professional what comes next.
Sources
What this page explains is based on these official sources. If you check one and it does not match what you read here, send it to us and the article gets corrected.
- Western Australian Department of Health. Guidance note: Identification of asbestos containing material
- Asbestos Safety and Eradication Agency. Asbestos Product Guide: what products contained asbestos and where they were used
- NSW Government. Asbestos in NSW: the NSW Government asbestos portal