Home › Identifying › Asbestos pictures: what photos can show and what they cannot

Asbestos pictures: what photos can show and what they cannot

A photo can show you where old asbestos products were used. It cannot tell you whether the material in your house contains any.

No picture of a material, yours or anyone else's, can confirm asbestos. The fibres are microscopic, and asbestos cement looks the same as modern fibre cement. What photos are good for is learning where to look and what raises suspicion.

So use pictures to build a shortlist of materials worth testing. Then let a laboratory decide.

Where to find photos you can trust

Start with the Asbestos Product Guide from the Asbestos Safety and Eradication Agency. It is built around images and descriptions of products that contained asbestos, with the brand and product names where they are known. It is organised by where a product turns up in a building, which is how most people search.

State regulators and the NSW Government asbestos portal also publish example images. Prefer these over a general image search, where captions are often wrong and the same photo gets reused for different materials.

What a photo can show you

  • Where it was used. Eaves, wet-area walls, fences, old flat roofs, meter boards and vinyl flooring all turn up in the guides.
  • What old products looked like. Corrugated roofing, flat sheet with cover strips, textured ceilings and old floor tiles are easy to compare against.
  • What a damaged material looks like. Useful for knowing when to stop and call someone.

What a photo cannot show you

A photo cannot tell you whether the sheet in your wall is the asbestos version or the later fibre cement version. They were made to look alike, and plenty of newer products do.

It cannot tell you either way from colour, texture or how weathered the surface is. Someone telling you «that is definitely asbestos» or «that is definitely fine» from an image is guessing. The Product Guide itself says that only testing a sample in a NATA-accredited laboratory confirms whether a material contains asbestos.

Do not send a photo to get a verdict

Posting a picture to a forum or social group and asking «is this asbestos?» gets you opinions, not an answer. If the opinion is «fine» and the sheet is old, you may start cutting. That is the one outcome to avoid.

Treat any answer from a photo as «unknown» and move to the real question: is anyone about to disturb this material?

Taking your own photos

Photos are useful for a different job. They help a licensed assessor or a laboratory understand what you are dealing with.

  • Take wide shots showing where the material is and what surrounds it.
  • Take close shots of any stamp, label or edge you can see without touching anything.
  • Note the age of that part of the house.
  • Do not break off a piece to photograph it.

From photo to answer

If the material is sealed and intact and nobody is touching it, note it and leave it. If a repair, renovation or sale is coming, either presume it contains asbestos or arrange laboratory analysis. Who may take a sample is set by the WHS regulator in your state or territory, so check before anyone picks up a tool.

Our guide to what asbestos sheeting looks like goes through the physical clues, and how testing works explains what a result tells you.

Frequently asked questions

Can you tell if something is asbestos from a photo?

No. The fibres are microscopic and asbestos cement looks like modern fibre cement. A photo can show that a material is worth testing, but only laboratory analysis of a sample confirms asbestos.

Where can I see reliable pictures of asbestos products?

The Asbestos Product Guide from the Asbestos Safety and Eradication Agency has images and descriptions of products that contained asbestos, with brand names where known. State regulators and the NSW Government asbestos portal also publish examples.

Is it safe to take a close-up photo of suspect material?

Yes, if you do not touch or disturb it. Photograph the area and any visible stamp or edge from where you stand. Never break off a piece to photograph it.

What should I do if my material looks like the pictures?

Leave sealed, intact material alone. Before any cutting, drilling, repair or removal, presume it contains asbestos or have a sample analysed by a NATA-accredited laboratory, and check your state or territory regulator's rules.

Sources

What this page explains is based on these official sources. If you check one and it does not match what you read here, send it to us and the article gets corrected.

Keep reading