What is ACM (asbestos-containing material)?
ACM is any material that contains asbestos. You cannot tell by looking, so treat suspect material with care until a result says otherwise.
ACM stands for asbestos-containing material: any product or material that has asbestos in it. In a house that usually means fibre cement sheet, roofing, eaves, flooring and some insulation.
The term is used by regulators, assessors and tradies. If a report or a quote mentions ACM, it is talking about material that contains asbestos or is suspected to.
What counts as ACM
The material does not have to be mostly asbestos. A sheet that is largely cement with asbestos fibre mixed in is still ACM. So is a vinyl tile with asbestos in the backing.
Australian guidance splits ACM into two broad groups. Bonded material has the fibres held firmly in a binder such as cement. Friable material can be crumbled by hand and releases fibres more easily. Our page on bonded and friable asbestos explains the difference.
Where ACM turns up in a house
- Fibro wall sheets and eaves.
- Corrugated roofing and fences.
- Vinyl floor tiles and the glue under them.
- Backing behind tiles in wet areas.
- Older insulation around pipes, hot water units and flues.
The list is a guide to where to be careful, not a finding about your home.
You cannot spot it by looking
Asbestos fibres are too small to see, and ACM looks like the same product without asbestos. A photo or a build year will not settle it either. Only laboratory analysis confirms what a material is made of, and a NATA-accredited laboratory is the one whose result you can rely on.
So say "compatible with ACM" or "suspected ACM" until you have a result, and not "it is asbestos".
What to do with suspected ACM
If it is sound and untouched, the usual approach is to leave it alone and keep it in good condition. If you plan work that would cut, drill, sand or break it, stop and get advice first.
Do not try to work out a safe method yourself. Who may sample, remove or dispose of ACM depends on your state or territory, so check with your WHS regulator.
The short version
ACM is a label for material that contains asbestos. It is not a verdict on your house. Leave suspect material undisturbed, get a laboratory result before any work and ask your regulator who may handle it. Our guide to how testing works is the next step.
Frequently asked questions
What does ACM mean?
ACM means asbestos-containing material. It is any product that contains asbestos, whether or not it is mostly asbestos.
Is all ACM dangerous?
We cannot give health advice. Regulators treat bonded and friable ACM differently, and sound, undisturbed bonded material is generally managed by leaving it alone. For health questions ask your doctor or state health department.
Can I tell if something is ACM by looking at it?
No. ACM looks the same as the product without asbestos. Only a laboratory result confirms it.
Who can test a suspected ACM?
Analysis is done by a laboratory, and a NATA-accredited one gives a result you can rely on. Taking the sample disturbs the material, so check with your regulator about who may do it.
Sources
What this page explains is based on these official sources. If you check one and it does not match what you read here, send it to us and the article gets corrected.
- Western Australian Department of Health. Guidance note: Identification of asbestos containing material
- Asbestos Safety and Eradication Agency. Asbestos Product Guide: what products contained asbestos and where they were used
- NSW Government. Asbestos in NSW: the NSW Government asbestos portal